Q Light Controller+

Hello,
I've found this issue with Cue Lists when the left fader is not full rised: when the Virtual Console Live Edit is activated the scene levels jump to full (to be precise to the function recorded levels), it happens with both dmx and audio levels.
regards

Giacomo, a few changes have been made to the crossfaders on GIT.
Please build from sources and report if what you see has already been fixed.

same issue with qlcplus-qt5-git 4.10.2.20151113

Hi,

I have tested several configurations and can't reproduce this issue, could you share a sample workspace demonstrating the issue ?

Also, are you talking about the Virtual Console Live Edit button, or the Function Live Edit button ?

Thanks

linux 64 qlcplus 4.10.1 qt5

_ cue list 8 > play the first cue "Audience in"
_ toggle the crossfade sliders in cue list 8 and set slider 1 @ 50% (or whatever)
_ open the Monitor to check the output...

_ case 1: toggle "Virtual Console Live Edit" and the output jumps to the real level of the recorded function.
_ case 2 / from another post but same effect: move the slider in SubMaster mode (it's one on the side of Cue List 4) and the output jumps to full level again.
same result for music, see cue list 1 and 2 in my show.

OK thank you, I see what the issue is now.

I'm working on a fix right now.

Now fixed in git.

hello, sadly it's still happening in 4.10.2 and 4.10.2b, both qt5 version, linux 64.

Hi,

I've tested with your workspace.

giacomo wrote:_ case 1: toggle "Virtual Console Live Edit" and the output jumps to the real level of the recorded function.

This does not happen anymore.

giacomo wrote: _ case 2 / from another post but same effect: move the slider in SubMaster mode (it's one on the side of Cue List 4) and the output jumps to full level again.
same result for music, see cue list 1 and 2 in my show.

This does not happen either.

giacomo wrote: hello, sadly it's still happening in 4.10.2 and 4.10.2b, both qt5 version, linux 64.

What is still happening ?

hi plugz,
I've the same issues with a new show but I tried again the file I posted here and I get the same problems on my machine, for light and sound.
qlcplus 10.4.2 and 10.4.2b, qt5, linux 64

giacomo wrote:qlcplus 10.4.2 and 10.4.2b

How do you test both 4.10.2 and 4.10.2b ? Are you sure you're testing the correct version ? In QLC+, what does the ABOUT page say ?

it says 10.4.2
I've built with the script from aur-archlinux and I downloaded the source 10.4.2b, yesterday I've tested the build from opensuse too.

giacomo wrote:it says 10.4.2

If it says 10.4.2, it's not QLC+. It should say 4.10.2.





Are you talking about the issue you describe here: http://qlcplus.org/forum/viewtopic.php?f=5&t=9184 ?

Because this issue is not the same as the one described in the current topic.

hey plugz, I'm trying to collaborate and yes I'm speaking about the issues raised in this topic, they still happen to me.
I've been 12 hours inside a theatre the last 2 days and sorry if this morning I wrote 10.4.2.

How do you test both 4.10.2 and 4.10.2b ?

because if you download from opensuse it says 4.10.2
https://software.opensuse.org/download. ... lcplus-qt5

maybe you don't trust me but I can confirm that it's not nice to be during a rehearsal with the artists and get all the cue lists at full.
regards

Don't take it personally

As I can't reproduce the issue, I fail to identify what's wrong.


Attached is a gif recorded from a QLC+ built with the latests sources.
This is the workspace you uploaded here.


The step1 of cuelist "8" is running.

Z-House #1 is at 107.

I pull the left fader down to 54%.

Z-House #1 is at 48.

Then I pull the SubMaster fader.

Z-House #1 does not jump back to 107. Before the bugfix, it would have jumped back to 107 when pulling the SubMaster fader.





So, one last confirmation: When you do EXACTLY these steps, does Z-House #1 jump to 107 ?