Q Light Controller+

Posted: **Sat Apr 25, 2015 10:38 am**

Hello,

I have a problem creating a fixture for Chauvet - Shocker™ 90 IRC QRG

In the manual, there is a function in a channel with a condition of state of an other channel. There is a maner to fix it?

The manual >> http://www.chauvetlighting.com/products ... _ML_WO.pdf

Thank's.

Posted: **Sun Apr 26, 2015 3:59 pm**

This situation is not supported in QLC+ now. You'll need to come up with something that fits both variants.
Most probably use the second version since it's split in two. Then remember that in some cases it may have different meaning...

Posted: **Sun Apr 26, 2015 8:03 pm**

Ok, thank's..

I made it like this...

Posted: **Sun Apr 26, 2015 8:06 pm**

Right, that's as good as it gets now.

Q Light Controller+

Channel problem "when is set as"

Channel problem "when is set as"

Re: Channel problem "when is set as"

Re: Channel problem "when is set as"

Re: Channel problem "when is set as"