I have a problem creating a fixture for Chauvet - Shocker™ 90 IRC QRG
In the manual, there is a function in a channel with a condition of state of an other channel. There is a maner to fix it?
Thank's.
Channel problem "when is set as"
-
joshuafred
- Posts: 5
- Joined: Mon Apr 20, 2015 7:22 pm
- Location: Nice - France
- Real Name: Frédéric Combe
Hello,
I have a problem creating a fixture for Chauvet - Shocker™ 90 IRC QRG
In the manual, there is a function in a channel with a condition of state of an other channel. There is a maner to fix it?
The manual >> http://www.chauvetlighting.com/products ... _ML_WO.pdf
Thank's.
I have a problem creating a fixture for Chauvet - Shocker™ 90 IRC QRG
In the manual, there is a function in a channel with a condition of state of an other channel. There is a maner to fix it?
The manual >> http://www.chauvetlighting.com/products ... _ML_WO.pdf
Thank's.
-
janosvitok
- Posts: 1331
- Joined: Mon Apr 13, 2015 7:05 am
- Location: Bratislava, Slovakia
- Real Name: Jano Svitok
- Contact:
This situation is not supported in QLC+ now. You'll need to come up with something that fits both variants.
Most probably use the second version since it's split in two. Then remember that in some cases it may have different meaning...
Most probably use the second version since it's split in two. Then remember that in some cases it may have different meaning...
-
joshuafred
- Posts: 5
- Joined: Mon Apr 20, 2015 7:22 pm
- Location: Nice - France
- Real Name: Frédéric Combe
Ok, thank's..
I made it like this...
I made it like this...
-
janosvitok
- Posts: 1331
- Joined: Mon Apr 13, 2015 7:05 am
- Location: Bratislava, Slovakia
- Real Name: Jano Svitok
- Contact:
Right, that's as good as it gets now.