Page 1 of 1
MA 2port node with qlc
Posted: Thu Jul 13, 2023 4:57 pm
by isakenge
Hey, my school has an old ma 2port node (
https://www.malighting.com/product-arch ... pc-130191/) and i have benn getting into qlc+ in the last couple of weeks. Since i think its easyer than ma2onpc, and i was wondering if you qould use the 2port node as an output in qlc beacuse i am wondering about getting a new usb to dmx cable or using the 2port node.
Re: MA 2port node with qlc
Posted: Thu Jul 13, 2023 6:43 pm
by janosvitok
Configure the node to accept artnet or sacn/e1.31 and qlc+ to output the same.
Make sure universe numbers match. Check documentation how QLC+ counts artnet universes.
Jano
Re: MA 2port node with qlc
Posted: Fri Jul 14, 2023 7:31 am
by GGGss
The most expensive QLC+ output device, I guess...
Re: MA 2port node with qlc
Posted: Sat Jul 15, 2023 12:12 pm
by Yestalgia
GGGss wrote: ↑Fri Jul 14, 2023 7:31 am
The most expensive QLC+ output device, I guess...
Running qlc+ through MA hardware is some gigachad energy
