MA 2port node with qlc

This is a place for sharing with the community the results you achieved with QLC+, as a sort of use case collection.
You can share photos, videos, personal hardware/software projects, interesting HOWTO that might help other users to achieve great results.
Post Reply
isakenge
Posts: 1
Joined: Thu Jul 13, 2023 4:55 pm
Real Name: Isak Enge

Hey, my school has an old ma 2port node (https://www.malighting.com/product-arch ... pc-130191/) and i have benn getting into qlc+ in the last couple of weeks. Since i think its easyer than ma2onpc, and i was wondering if you qould use the 2port node as an output in qlc beacuse i am wondering about getting a new usb to dmx cable or using the 2port node.
Top
janosvitok
Posts: 1325
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:
Contact janosvitok

Configure the node to accept artnet or sacn/e1.31 and qlc+ to output the same.

Make sure universe numbers match. Check documentation how QLC+ counts artnet universes.

Jano
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

The most expensive QLC+ output device, I guess...
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
Yestalgia
Posts: 419
Joined: Thu Jun 17, 2021 9:31 am
Location: Australia
Real Name:
Contact:
Contact Yestalgia

GGGss wrote: ↑Fri Jul 14, 2023 7:31 am The most expensive QLC+ output device, I guess...
Running qlc+ through MA hardware is some gigachad energy 8-)
Top
Post Reply

Return to “Community”