Page 1 of 1
Multiple Lamps on Single Fixture
Posted: Fri May 12, 2023 10:55 am
by Robacham
Hi,
I have a fixture with 8 individual RGB lamps.
How do I get this to show as individual lamps on then RGB Fixture Group Matrix?
It just seems to give it a single place holder.
Any help is much appreciated.
I want to be able to utilise the RGB Matrix functions.
Re: Multiple Lamps on Single Fixture
Posted: Fri May 12, 2023 12:58 pm
by MichelSliepenbeek
You could start by telling the brand and model of the Fixture.
First check the manual of the Fixture, whether it has separate channels to control the 8 lamps individually.
Then make sure that you use the right Fixture Definition and set the Fixture to the right Mode.
Re: Multiple Lamps on Single Fixture
Posted: Fri May 12, 2023 1:23 pm
by DavidGrc
Hi,
In fixture creator, you can tell how many heads (lamps) there is. RGB matrix take care of that.
Re: Multiple Lamps on Single Fixture
Posted: Sat May 13, 2023 6:21 pm
by prophy17
As far, as I know RGB Matrix works only with a group. Maybe you should make a group with your fixture (only with one, if you have single, for example).
So step by step:
- Fixture list
- Select your fixture
- Right click of your mouse
- Add fixture to group select
- New Group select
- Make a name of your Group
- OK
Then:
- Functions list select
- RGB Matrix select
- Fixture group in the upper right corner select
- Name of your group select
Then:
- Set RGB Matrix, as you want.
That`s all.
Try it. Maybe it will help you.
Excuse me, if I am not right.
Best regards.
Re: Multiple Lamps on Single Fixture
Posted: Mon May 15, 2023 9:38 am
by prophy17
Have you cope with your problem, Mr Robacham? I hope you have won.