RGB Strip orientation/placement in Fixture groups matrix

Ask a generic question about the usage of QLC+, not related to a particular operating system
Forum rules
Post Reply
seanephram
Posts: 3
Joined: Mon Dec 21, 2020 11:07 pm
Real Name: sean ephram

hey guys

i've been using the RGB Panel tool to group, create and orient WS style LED strips in the fixture editor.

Is there a more efficient way to move large sets of pixels and orient them either horizontally or vertically?

For now, i've been setting the matrix editor to 20x20 (or whatever suits my pixel count), but for long throws, this takes a LOT of clicking and dragging.

I surmise my question can be solved using the two arrows on the right and i've yet to get it to work
Capture.JPG
Help!
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

You already checked this for sure: https://www.qlcplus.org/docs/html_en_EN ... ditor.html
There isn't any wizardry possible to solve everyone's pixel setup. So yes it involves some clicking but once set, you are fine...
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
Post Reply

Return to “Generic”