Overall scene level control in collections

[bleurose]

You can currently add a scene to a button or slider in VC and set the level of the scene. This sets all dim levels in the scene (but not color/gobo channels) relative to the overall dim level for the scene.

What I would like to do is have that capability extended to a Collection. Inside a collection, I want to set each scene's dim level proportionally to its actual settings. So if I have Scene 1 controlling channels 1 (100%), 2 (50%) and 3 (80%) and Scene 2 controlling channel 4 at 100%, if I put both into a collection, then the scenes are locked in relation to each other. I would like (inside the collection) to set scene 2 at say 60% and scene 1 at say 75% so that channel 1 is at 75, 2 is at 34, 3 is at 60 and 4 is 60. I would like to do the same in a chase (set the level of each scene/collection in the chase in addition to its timing.

Jon "bleurose" Rosen

[GGGss]

Did you try the submaster solution? https://www.qlcplus.org/docs/html_en_EN/vcslider.html under Submaster