Hello,
I am using a Raspberry Pi 3b with the UART plugin. I have a very simple project that turns 3 fixtures red, but for some reason the web interface crashes when my addresses start at 300. If my addresses starts at 1, everything runs smoothly. If I try to load the project with the starting address of 300, sometimes the web interface works, but most of the time it crashes. Any ideas what could be causing this? The 3 fixtures have addresses 300, 304 and 308. If it is useful, here is my project file.
Thanks!
Web Interface Crashes
-
mcallegari
- Posts: 4914
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Which image/QLC+ version are you using?
-
jplunkett
- Posts: 7
- Joined: Mon Oct 07, 2024 1:20 am
- Real Name: Jeremy Plunkett
qlcplus_raspios_bookworm_20240907.img
-
mcallegari
- Posts: 4914
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Please try the latest version
-
jplunkett
- Posts: 7
- Joined: Mon Oct 07, 2024 1:20 am
- Real Name: Jeremy Plunkett
I downloaded the latest image, and I am still running into the same issue.