- When selecting a channel with [1] [ENTER] and pressing [FULL] [ENTER], the DMX value of the channel is set to 0, not 255.
- When setting a channel to full value with [2] [FULL] [ENTER] and clicking [ENTER] (therefore sending an empty command), the DMX value of the selected channel (in this case channel 2) is set to 0.
- The Plus and Minus buttons don't work.
some DMX Keypad bugs
-
arneB
- Posts: 25
- Joined: Sun Jan 22, 2023 8:42 pm
- Real Name:
Thanks to everyone who helps with this incredible software!
-
mcallegari
- Posts: 4908
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
You need to do "1 ENTER" and then "AT FULL"
For "+/-" I need to check but the supported syntax is "2 +% 15" to increase by 15% or "42 -% 30" to decrease by 30%
The only real bug I see here is the "ENTER" which sends an empty command. That should not be allowed
For "+/-" I need to check but the supported syntax is "2 +% 15" to increase by 15% or "42 -% 30" to decrease by 30%
The only real bug I see here is the "ENTER" which sends an empty command. That should not be allowed