RGBWW Matrix

[GGGss]

There may be a very simple workaround, and this may just be my ignorance to the software. But my intended outcome is having a 160 channel RGBWY pixel light tube patched in QLC+, and my journey in figuring out how to do that brought me here.

You need a custom fixture definition for QLC+ to understand the logic inside your strip. I suggest you start looking at the Event lighting Pixbar 12x12W and use this as a source for your custom definition. (Open this, with QLC+, included fixture definition, and have a look at the 74-channel mode. It already has RGBWA and UV channels present. TopTip: Do not forget to define the heads part.) https://docs.qlcplus.org/v4/fixture-def ... #heads-tab

[MichelSliepenbeek]

Try This:

Donnie-Special-160-Channel-Tube.qxf

(20.3 KiB) Downloaded 6 times

The dimensions are probably not correct, but it will show up in 2D Monitor.
Feel free to change the dimensions so that it will match with your other Fixtures in the 2D Monitor.