Generic dimmers and functions
-
EORTTD
- Posts: 1
- Joined: Mon Oct 14, 2024 9:22 pm
- Real Name: Reed W
I picked up some old Leviton dimmers and I am using a DMX to 0-10V convert to run them. When I use the simple console, I can see the dimmers and control them, but when I use the generic dimmer fixture, it does not work in functions. Not sure what to do here since I am relatively new to QLC. Thanks!
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Welcome to the community,
If you switch from Simple Desk to anything else, make sure there are no red 'X's present. Simple Desk has the utmost priority. Even a slider at zero, will overrule anything else.
If you can control your lights with the sliders in Simple Desk, you should be able to do so with a generic dimmer. (At the correct address that is.)
If you switch from Simple Desk to anything else, make sure there are no red 'X's present. Simple Desk has the utmost priority. Even a slider at zero, will overrule anything else.
If you can control your lights with the sliders in Simple Desk, you should be able to do so with a generic dimmer. (At the correct address that is.)
All electric machines work on smoke... when the smoke escapes... they don't work anymore