Cue list malfunction when triggered by Midi

[Bikestuff]

I'm going crazy...
I've created scenes, put them into a chaser and control the chaser with a cue list that is triggered by a Midi Note.
Whem I call the cue steps manually (by slider or with the < > arrow buttons) all works fine.
The DMX values are as expected

Blue scene MANUAL

So far, so good.

When I switch to show mode an start the Midi track, the cue steps are triggered one after the other -as expected- but the scenes now look totally different:
In the DMX Monitor the values are now different:

Same Scene, Cue triggered by Midi

I don't understand it. I've found nothing in the cue properties what could cause the difference.
Tried to use entries from a different chaser but it stays the same effect.
Where come these unexpected DMX values from?

I've cheched the scenes: they work as expected
I've checked the chaser: you can go forward or backward, works as expected.

No idea

[Bikestuff]

Here ist the fixture I Use and some other scenes with the same effect:
Manual triggered

Midi controlled

[sbenejam]

Hi,
In your project you have assigned the MIDI Channel 189 to next cue in the cuelis, but is assigned too to play another cuelist existing in your project.
Check unused/hidden cuelists.

[Bikestuff]

Hi,
In your project you have assigned the MIDI Channel 189 to next cue in the cuelis, but is assigned too to play another cuelist existing in your project.
Check unused/hidden cuelists.

Yeah, you're right: I found a cue list in background which was triggered with the same note
Had a false perception about what is active and what not and I have forgotten what I habe tested in the past to learn about QLC+.
Thanks sbenejam, your answers -so far- lead to 100% problem solution

Is there an overview of what midi notes are used or can it only be found in the .xml?