Nanokontrol2 problem with sliders and knob

Ask a generic question about the usage of QLC+, not related to a particular operating system
Forum rules
Post Reply
elcy
Posts: 10
Joined: Mon Dec 14, 2015 5:59 pm
Real Name: ERIC lachery

I have a problem with my nanokontrol2 , it is recognized in QLC , and in daslight (no problem in das light ) but impossible to affect a knob or a slider ,
but ok for button (?) .somebody had this problem ?
Top
rrstudio2
Posts: 14
Joined: Sun Jan 20, 2019 5:02 am
Real Name: Andrew

I use a NanoKontrol2 and it works fine with QLC. One thing to check is by default the NanoKontrol transmits on different midi channels (slider 1 is midi channel 1, slider 2 is midi channel 2, etc). You can use the NanoKontrol software to change this and make them all transmit on the same channel.

-Andrew V. Romero
Top
AllanR
Posts: 51
Joined: Tue Jun 02, 2015 4:29 pm
Location: Scotland
Real Name: Allan Rhynas

Have a look at my earlier thread, and try the attached test workspace plus profile.
viewtopic.php?f=30&t=11941&p=55312&hili ... ol2#p55312

All buttons, sliders, pots should work.
Top
Post Reply

Return to “Generic”