Hello!
I think perhaps this issue is similar to these:
viewtopic.php?f=22&t=12472
viewtopic.php?f=22&t=12278
If I add a 'scene' into a show, it creates a sequence, but then the scene is hidden from the list of scenes forever more, this hasn't always happened I don't think.
The scene/sequence continues to work as it should in the show if I just press play, but I also get the problem that others have mentioned in that sometimes the values are randomly reset to 0.
See attached screenshots, I have used 5 scenes in the little test show, and all 5 are now missing from the scenes list, sometimes they are still shown in the list of scenes but can't be selected, but I am struggling to reproduce that problem now.
I am using 4.11.2.
Apologies if I am reporting something that is already known!
Scenes Disappear Once Used In Show
-
trolly
- Posts: 16
- Joined: Sat Nov 21, 2015 5:30 pm
- Real Name: Oliver
- Attachments
-
testing moving head.qxw- (51.18 KiB) Downloaded 173 times
-
-
trolly
- Posts: 16
- Joined: Sat Nov 21, 2015 5:30 pm
- Real Name: Oliver
Ok, I've done a bit more testing, and I can reliably reproduce this, I don't think this is intended behaviour?
1. Make some scenes
2. Add a scene to a show by clicking the green '+' button and selecting a scene
3. Save the workspace
4. Close QLC+
5. Open QLC+, any scenes that have been used in the show are now gone
I have updated to one of the latest builds, 4.12, and tried it again, but it is still the same, see attached screenshot.
1. Make some scenes
2. Add a scene to a show by clicking the green '+' button and selecting a scene
3. Save the workspace
4. Close QLC+
5. Open QLC+, any scenes that have been used in the show are now gone
I have updated to one of the latest builds, 4.12, and tried it again, but it is still the same, see attached screenshot.
- Attachments
-
- testing moving head.qxw
- (46.35 KiB) Downloaded 143 times
-
-
mcallegari
- Posts: 4711
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Have a look at this: viewtopic.php?f=17&t=11062&p=47687
Translated: do not re-use Scenes in Shows. Duplicate them first or let Sequences create them for you.
Translated: do not re-use Scenes in Shows. Duplicate them first or let Sequences create them for you.
-
SoCalAaron
- Posts: 3
- Joined: Wed Jun 13, 2018 6:22 pm
- Real Name: Aaron
The only thing I can come up with is to dump the values into a new scene while playing the show. Add some hold time to the default to give your fingers enough time and keep the DMX monitor screen up to see what's being fed out.