4.9.1 Completely unstable on Windows 8 with MIDI

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
BamBam
Posts: 13
Joined: Fri Jun 19, 2015 2:02 am
Real Name: David

Gentlemen,

I have been having numerous problems with QLC+ stopping using Windows 7. I had managed to stabilize it by replacing an mp3 audio file with a WAV file. Now, when operating on a Windows 8 laptop and adding a MIDI input, the program stops after 5-10 seconds, even if I do not perform any actions at all. The behavior began when I plugged a MIDI device into the ENTTEC PRO MK2 I am using as a USB DMX box.

I also did not see any of the mapping information the help file implies will come up when configuring the MIDI input.

Is there something I am missing in this operation. The forum is filled with success stories of this software/hardware combination and I am not experiencing anything remotely close to functioning software.

I will post the file here shortly.
Top
BamBam
Posts: 13
Joined: Fri Jun 19, 2015 2:02 am
Real Name: David

This is the show file I am using.

The MIDI controller is a MIDIMan Oxygen8 keyboard
Attachments
RaviDrums LED Kit.qxw
(34.65 KiB) Downloaded 37 times
Top
Post Reply

Return to “Archive - no new threads please”