Hi all,
What I see lacking is a way to set a chase tempo by tapping a button(s). I know we can set the over all timer with a TAP tempo. What I would like to see is a way to set each chase step with a button or buttons.
Example: Setting up several beat lights for pre-recorded music.
1) Create new chase
2) Activate TAP timer. After first tap all times are recorded for TAP duration and time between taps until TAP timer is disabled.
TAP1-time 0:0:0.5 - Button 1 was pressed for 1/2 second
GAP-time 0:0:2.2 - Time between TAP1 button release and next tap button
TAP1-time 0:0:1.2 - Button 1 was pressed for 1.2 seconds
GAP-time 0:0:2.2 - Time between TAP1 button release and next tap button
TAP2-time 0:0:3.0 - Button 2 was pressed for 3.0 seconds
With a simple way to replace or preset the TAP1 = scene BLUE, TAP2 = Scene GREEN then you could choreograph a music type event.
Q Light Controller+
Official forums of the QLC+ project