Page 1 of 1
Cameo-CLHB400RGBW
Posted: Thu Mar 17, 2016 1:48 am
by Mihai Andrei
Re: Cameo-CLHB400RGBW
Posted: Thu Mar 17, 2016 10:36 am
by boxy
Is the attached manual the fixture you have provided the definition for?
If it is meant to be then it is completely wrong. The manual says 6, 10, 19 or 320channel modes. Your definition contains 14, 56, 14, 14, 14 and 14.
Re: Cameo-CLHB400RGBW
Posted: Thu Mar 17, 2016 10:40 am
by plugz
boxy wrote:
Is the attached manual the fixture you have provided the definition for?
FYI you haven't attached the manual
Re: Cameo-CLHB400RGBW
Posted: Thu Mar 17, 2016 11:58 am
by boxy
Oops!
Attached is what I think it should be (and the manual). This is completely different to what was in the original post.
Re: Cameo-CLHB400RGBW
Posted: Thu Mar 17, 2016 12:20 pm
by Mihai Andrei
I have seen only once the manual and I created it ...
then I did not get it because most were not my mini heads so I was so ...
I use it in mode: 1 fixture 56CH and 4 heads, totally independent
in QLC + we see just 2 fixture (if you have 2 or 8 bars moving heads) ...
as physically they are actually post ...
Thank you
Re: Cameo-CLHB400RGBW
Posted: Thu Mar 17, 2016 6:23 pm
by mcallegari
is good at the manual and that ... I saw once that I created ... then mostly perhe I found were not my mini heads .. so I was so ... I use it in modalida with 56ch 4 fixture heand ... in qulc you vedeonono 2 fixture just ... like effetivamte are ...
big drawback is the motor speed ... must always be placed at the most ...
What does that mean ?? Do you actually read what you write ??
I guess you even use Google translator cause half of the sentences are in a messed up italian !
Re: Cameo-CLHB400RGBW
Posted: Thu Mar 17, 2016 11:03 pm
by Mihai Andrei
I have this:
6-CH Mode
10-CH , 19-CH Mode
32-CH Mode
56-CH Mode
continuos 56ch
EDIT:
ok. I sat quietly and I did everything by the book .. (what have I in the pictures) ...
and that I currently use to the disco
Re: Cameo-CLHB400RGBW
Posted: Fri Mar 18, 2016 9:41 am
by boxy
The links don't work for me. I still don't understand where the 56 channel mode comes from. I have tried loads of links from google for this part number and they all come up with 6, 10, 19 and 32 channel modes.
Can you attache the actual pictures instead of links to your interesting picture bucket?
Re: Cameo-CLHB400RGBW
Posted: Fri Mar 18, 2016 12:40 pm
by Mihai Andrei
even I do not understand why you can not find this manual on the internet.
maybe it was the beginning of a production lot and then they stopped.
the purchase was made on thomann:
http://www.thomann.de/gb/cameo_hydrabea ... e_rgbw.htm
and also here it specifies up to 32 Channels
photos send me your son made by those who gave me the bar-moving heads ....
tonight I do give me paper ..
Cameo-CLHB400RGBW.qxf