Q Light Controller+

Hey guys,

I noticed some strange (since inconsistent) behavior related to submasters.
Please have a look at the attached workspace:

- Turn the slider in submaster mode up. The knob raises with the sliders, but there is no DMX output.
I would expect either the knob not to move or some DMX output according to the knob.

In addition to this, I would have expected another behavior when putting the submaster back to 0:
- press the button while the slider is full on
- the knob and respective dmx channel raises
- bring the slider down to 0, the knob goes to 0 (expected), but the scene button is still active although the knob with this scene is at 0 (unexpected).

I'm using QLC+ 4.10.3 GIT on 64Bit Xubuntu 14.04 with Qt 5.

Thanks in advance!

Regards, Lukas

hi,

yes i confirm...strange??

i have tested with a fader...and no prob...only with a knob??

regards

re hey

i found something...it work in level mode but not in playback mode....i dont know if that is normal ...

but something even more strange...if you just switch your knob to level mode it still no work

you need first in playback mode detach the function...and only after that it works in level mode...

i thought when we switch to another mode playback func to level....playback is normaly no more activ ???

it looks like little bug...

well the only solution i found ...at the mom

JD

I think this is the correct behaviour. Take a look to QLC+ help. http://qlcplus.org/docs/vcslider.html

sbenejam wrote:I think this is the correct behaviour. Take a look to QLC+ help. http://qlcplus.org/docs/vcslider.html

I already read that, but I still don't think that this is correct. Especially because as jadaudiodesign mentioned the behavior is not consistent to sliders, too.