[SOLVED] [Windows] Video does not open in the correct screen

The issues found when using the Function Manager panel
Post Reply
willmodelisme
Posts: 53
Joined: Wed Jan 20, 2016 7:50 pm
Location: PARIS France
Real Name:

SETUP:
QLC+ 4.10.3 TEST
I have setup a show with a video.
I have may laptop (win 10) setup with an 2nd screen attached to a VGA output (extended display setup for projection).
I have setup the video of my show to be played FUL SCREEN on SECOND screen (to simulate the video projector).

PROBLEM:
- when I open the qxw and play my show, the video is played FULL SCREEN but on the FIRST SCREEN (the main one where I control QLC+ ) and I just can't stop anything till the end of the show.

WORKAROUND:
I play all my shows once first with the button "windowed" thick for screen 2.
Then I can thick the FULL SCREEN button and it is OK.


No qxw provided because a video is involved.
Tell me I you need one anyway.

Many thanks to everyone for all your support :D
Enttec DMX USB Pro
Windows 10
willmodelisme
Posts: 53
Joined: Wed Jan 20, 2016 7:50 pm
Location: PARIS France
Real Name:

Can someone have a look to my issue and tell me if that is a normal behavior or a bug ? ?
Last edited by willmodelisme on Thu Feb 25, 2016 4:21 pm, edited 1 time in total.
Enttec DMX USB Pro
Windows 10
janosvitok
Posts: 1325
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:

I'd guess it's a bug. I don't use video, so I don't have experiences in this area. It may turn out it's QLC+ bug but it may as well be a bug in Qt or windows.
User avatar
mcallegari
Posts: 4711
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

I think I've seen it before, and unfortunately it depends on the Qt libraries.
I think I also tried to workaround it, without luck.
I'll try again when I'll have some time.
AlCan13
Posts: 2
Joined: Mon Apr 04, 2016 4:40 pm
Real Name: Alexey Busov

I confirm!
it is a bug!
User avatar
mcallegari
Posts: 4711
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

please try this and let me know if it is fixed
viewtopic.php?f=12&t=3135
willmodelisme
Posts: 53
Joined: Wed Jan 20, 2016 7:50 pm
Location: PARIS France
Real Name:

TKS mcallegari.
I am looking at it.
I have just switch to linux, and, if I the 4.10.3 install was quite easy ( ny first try with an ubuntu distrib), I do have trouble to install that latest one 4.10.4.
I'll keep on trying.
I'll tell you for windows 10 also soon.
Enttec DMX USB Pro
Windows 10
User avatar
mcallegari
Posts: 4711
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

willmodelisme wrote:I have just switch to linux, and, if I the 4.10.3 install was quite easy ( ny first try with an ubuntu distrib), I do have trouble to install that latest one 4.10.4.
The Linux version doesn't have the video positioning issue. Even version 4.10.3a.
Please let's stay on topic and focus on the Windows version
willmodelisme
Posts: 53
Joined: Wed Jan 20, 2016 7:50 pm
Location: PARIS France
Real Name:

I know Massimo :)
I was just trying to tell that I "definitely" switch to linux when using QLC+ ( with open speech about my difficulties to install QLC+, but I agree, it's off topics, just disregard).

Anyway, I install it to my windows 10 PC for checking (and because I opened this topic) and so far so good it work like a charm.

Many tks again for your work.
Enttec DMX USB Pro
Windows 10
Post Reply