[solved] Channel stays at previous value
Posted: Thu Jan 28, 2016 10:41 am
Hi guys,
I've a 1-channel DMX Fogger (self created fixture) with 2 scenes in QLC+ 4.10.3 (GIT) on linux:
Heater ON - DMX-Value: 20
Fog ON - DMX-Value 255
The Fog ON is a Flash button and works as expected, the Heater-Button is a toggle-button.
When I turn off the heating-button the output still stays at 20.
The "Stop ALL functions" button is inactive. The simple desk shows the fader at value 20, but the clear "Reset this channel"-button below also doesn't set the channel back to zero.
Anyone knows this problem and/or solution?
all the bests!!
I've a 1-channel DMX Fogger (self created fixture) with 2 scenes in QLC+ 4.10.3 (GIT) on linux:
Heater ON - DMX-Value: 20
Fog ON - DMX-Value 255
The Fog ON is a Flash button and works as expected, the Heater-Button is a toggle-button.
When I turn off the heating-button the output still stays at 20.
The "Stop ALL functions" button is inactive. The simple desk shows the fader at value 20, but the clear "Reset this channel"-button below also doesn't set the channel back to zero.
Anyone knows this problem and/or solution?
all the bests!!