Page 1 of 1
0000000
Posted: Sat Jan 09, 2016 3:12 pm
by Tyterh
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Re: one touch prerecordings?
Posted: Sat Jan 09, 2016 5:06 pm
by tornel
Yes, it's doable.
In fact that's one of the main features of QLC+.
VERY simplified walk-trough:
- Add fixtures
Create a timed Show (one for each song).
In virtual console you create buttons and link them to the corresponding Show.
Set input and output mapping (OSC and DMX, for example)
Link each button to the corresponding input signal (OSC in your case)
Activate the buttons via TouchOSC
The
manual is your friend!
Luis
Re: one touch prerecordings?
Posted: Sat Jan 09, 2016 5:07 pm
by mcallegari
It is possible indeed.
There are people in this forum doing the same on stage but with a MIDI foot pedal
video here:
https://www.youtube.com/watch?v=l14ejw- ... e=youtu.be