Q Light Controller+

Hi guys

I have a problem with the OSC configuration, TouchOSC recive a feedback data from Qlc+ (if i move a slider on qlc its move correctly on the app) but if i move the touch slider on the app nothing happens in Qlc+.

Some information about my network and configuration:

QLC+
IP: 192.168.1.107
Incoming port: 7700
outgoing port: 9000
trasmission IP: 192.168.1.112
Plugin flag on input and feedback
Custom layout of touchOSC correctly inserted and pached on virtual console

TouchOSC IP: 192.168.1.112
Host: 192.168.1.107
Incoming port: 9000
Outgoing port: 7700
ZeroConf: Blank

Thanks for helping me

Please attach your qxw file.

If i don't use a profile the OSC work normaly now, if i select my custom profile (make with autoreconition) nothing response apart the feedback

I am having the same issue, was a solution found yet? I am using the newest version 4.10.1

Lightboymike wrote: I am having the same issue, was a solution found yet? I am using the newest version 4.10.1

4.10.2 is the newest version, not 4.10.1.

And please also post you qxw file, thank you.

My Apologies if this is an obvious thing, but I had trouble with this due to my Firewall blocking certain ports, following this, the ports were reserved for other utilities in the demo room. Worth checking in case you have a clash there.

Works now THANKS! Im still having an issue getting communication with Resolute VJ program. So that if i make a Button in QLC that controls something in Resolute.