BCR2000 Input Profile

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
xarumanx
Posts: 4
Joined: Sun Dec 20, 2015 8:40 pm
Real Name:

as i wasn't able to find one and i got the BCR2000 as a new toy this Christmas...

Here is the input profile i hacked together today. I used standard "Knob" inputs, not the new "Encoder" inputs, as i had no time to play around with the new features...
Attachments
Behringer-BCR2000.qxi
(9.28 KiB) Downloaded 53 times
Top
User avatar
mcallegari
Posts: 4827
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

xarumanx wrote:as i wasn't able to find one and i got the BCR2000 as a new toy this Christmas...

Here is the input profile i hacked together today. I used standard "Knob" inputs, not the new "Encoder" inputs, as i had no time to play around with the new features...
Hi, thanks for sharing !
Just one question: what "EG" stands for ? Is that a convention you found in the manual ? (I checked but couldn't find a MIDI mapping of this device)
Top
xarumanx
Posts: 4
Joined: Sun Dec 20, 2015 8:40 pm
Real Name:

EG - Encoder Group

you can switch between 4 encoder groups (buttons on the top right of the bcr). those buttons send no midi note but switch the 8 push-encoders on top of the board to send different notes. so depending on which encoder-group button is selected the correspondent EG - action is executed. I couldn't think of any better shorthand for it :)
Top
User avatar
mcallegari
Posts: 4827
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

What do you think about "Top Group 1" , "Top Group 2", etc.. ?
Takes more space, but I think it can be understood right away by other users
Top
xarumanx
Posts: 4
Joined: Sun Dec 20, 2015 8:40 pm
Real Name:

you're probably right...

i renamed the buttons and put everything onto github to make it easier to handle...

https://github.com/xarumanx/qlc
https://github.com/xarumanx/qlc/blob/ma ... CR2000.qxi
Top
User avatar
mcallegari
Posts: 4827
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

If you use GitHub, why don't you fork the official repository and send us a Pull Request ?
Just place your new profile file into resources/inputprofiles and create a pull request.
Top
xarumanx
Posts: 4
Joined: Sun Dec 20, 2015 8:40 pm
Real Name:

done.
Top
Post Reply

Return to “Archive - no new threads please”