Page 1 of 1
audio Inout Question
Posted: Mon Oct 26, 2015 4:41 pm
by Ham
Is it possible to map the internal audio to the input of qlc+? I am using 4.10.1 and can see the microphone as an input and the earphone/ speaker as output. What I want to do is use the audio playing on the same computer that isrunning QLC+ to trigger audio events in an audio trigger widget. In the Audio tab of the IO I can't route the speaker to the input.
Re: audio Inout Question
Posted: Mon Oct 26, 2015 5:36 pm
by janosvitok
Currently it is not possible. You have to achieve that somehow outside of QLC+
Re: audio Inout Question
Posted: Tue Oct 27, 2015 9:19 am
by Ham
Thanks, I'll figure something out.
Ham
Re: audio Inout Question
Posted: Tue Oct 27, 2015 11:15 am
by janosvitok
What's your OS?
Re: audio Inout Question
Posted: Tue Oct 27, 2015 1:09 pm
by mcallegari
From the screenshot it seems like Windows.
A quick research shows that JACK should be the one to be used (yes, they ported it on Windows and OSX too
)
http://www.jackaudio.org/
Re: audio Inout Question
Posted: Sat Oct 31, 2015 2:16 pm
by Mixalisfr
i would like to ask Ham if the audio input works and the fft module don't freeze ( if he is using windows)
Re: audio Inout Question
Posted: Wed Nov 04, 2015 8:07 pm
by Ham
I'll try the Jack, but probably I'll hook up my Roland Octacap ture and use the output from it. Unfortunately, I am busy with a Christmas fashion show and some music gigs so I don’t have much time to experiment . Life would be a lot simpler if I didn't have to go to work to pay for all my toys!
Re: audio Inout Question
Posted: Wed Nov 04, 2015 8:08 pm
by Ham
Yes OS is Win 10.