Page 1 of 1

My Fixture part 3

Posted: Wed Oct 21, 2015 4:31 pm
by Mihai Andrei
I saw that in the new version of QLC +, or the 04/10, have been added to the fixtures presented by me .. and I'm glad
tonight I send another fixture with which we work and often do not in your database

1) SGM Giotto Spot 400
PDF Manual : http://sgmlight.com/media/1902/Giotto_Spot_400.pdf
SGM-Giotto-Spot-400.qxf
(9.15 KiB) Downloaded 59 times
2) BeamZ S2000 RGB Led FOG machine
PDF Manual: http://files.tronios.com/Manuals/160.500%7CManual.pdf
BeamZ-S2000.qxf
(2.51 KiB) Downloaded 98 times
I will come soon with updates
Thanls you

Re: My Fixture part 3

Posted: Thu Oct 22, 2015 9:29 am
by boxy
Hi Mihai,

Could you add some descriptions more similar to those in the manual?

For the SGM Giotto, the macro modes have almost no detail (eg. Macro 8, iris) and the Effects Wheel values are different to the manual. I try to use exactly the channel names/capabilities used (although correct typo errors etc.), and use capitals for the channel name and lower case (apart from the first word) for each capability. Also, if a word like mode or speed is used in the channel name, there is no need to repeat it for each capability.

Example (-ch 21-):

Name: Gobo Mode (Capitals)

0..127: Position indexing (Capital 1st letter only)
128..255: Rotation at adjustable speed in both directions (full description minus word gobo as it's in the name)

Granted, the descriptions for channel 22 are huge so could be shortened - we are not rewriting the manual here.

Finally, I looked at the similar fixtures already added. Perhaps they could do with an update too.

Thanks

Re: My Fixture part 3

Posted: Thu Oct 22, 2015 9:29 am
by Mihai Andrei
boxy wrote:Hi Mihai,

Could you add some descriptions more similar to those in the manual?

For the SGM Giotto, the macro modes have almost no detail (eg. Macro 8, iris) and the Effects Wheel values are different to the manual. I try to use exactly the channel names/capabilities used (although correct typo errors etc.), and use capitals for the channel name and lower case (apart from the first word) for each capability. Also, if a word like mode or speed is used in the channel name, there is no need to repeat it for each capability.

Example (-ch 21-):

Name: Gobo Mode (Capitals)

0..127: Position indexing (Capital 1st letter only)
128..255: Rotation at adjustable speed in both directions (full description minus word gobo as it's in the name)

Granted, the descriptions for channel 22 are huge so could be shortened - we are not rewriting the manual here.

Finally, I looked at the similar fixtures already added. Perhaps they could do with an update too.

Thanks
eh unfortunately are changes made during an evening .. if I happened on that day took the fixture nearest model and modified to li ..
us about the fixture for good .. just updated the remit
thank you

Re: My Fixture part 3

Posted: Thu Oct 22, 2015 10:03 am
by boxy
Re: BeamZ S2000

The definition has no physical data, and has 5 channels plus the null one (channel 2). The manual shows only 3 plus the No Function channel.

Does the attached look correct?

Regards,

Robert

Re: My Fixture part 3

Posted: Thu Oct 22, 2015 10:03 am
by Mihai Andrei
boxy wrote:Re: BeamZ S2000

The definition has no physical data, and has 5 channels plus the null one (channel 2). The manual shows only 3 plus the No Function channel.

Does the attached look correct?

Regards,

Robert
I did so and I also had to hand

Image