Speed Dial - Suggestions etc

[Deece]

Just some suggestions for improvement of a neat, usefull widgit...

1) When the multiplier arows are displayed, can they be linked to the Fade In/Fade out options on the properties/function tab?
Currently if the UP/Down arrows are used, you have to set FadeIn/FadeOut to at least 1 as well. And if you set FadeIn/FadeOut to 2 or more, you get a double multiplier.
(Up/Down multiplier + FadeIn/FadeOut multiplier)

2) Presets. Can the preset buttons be made to switch on AND off ie 1 click activates preset, 2nd click deactivates?
Also, when a preset is active, can the multiplier multiply the preset? Currently if a preset is active, a click on the Up/Down arrow deactivates the preset, and the time is reset to whatever it was before the preset.

3) Could there be a multiplier reset button? ie if you have the multiplier set to x8, rather than click the down button 3 times, just click 'reset' to get back to x1

[mcallegari]

I'm afraid your post is a bit premature, since we're still working on the Speed Dial.
You are referring to a 4.10.0 test version which has changed in the meantime.
Please be patient and wait for new test versions. I will build them soon.
Btw. The factor reset button is there now. (see my last screenshot here: https://github.com/mcallegari/qlcplus/pull/587)

If you're curious of what we've done in the last couple of weeks, please have a look at the commits on GitHub.

[Deece]

lol
Thanks Massimo.

I knew you were working on it, so thought I'd get comments in early.
(while I'm here....can the hms:s boxes change colour when selected. )

[mcallegari]

Oh come on ! Don't push it too much

[Deece]