Page 1 of 1
Problem with "APC40 MK2"
Posted: Wed Sep 23, 2015 5:37 pm
by bebellaseg
Hello first sorry for the spelling mistakes I do not speak English very well I use "google trad."
I have an "APC 40 mk2" in recent days. All buttons "MIDI" are recognized except 2-3-4-5-6-7-8 faders. The 1 and master are very well known but the 7 others not.
Your help would be very useful ... thank you in advance.
ABEL
Re: Problem with "APC40 MK2"
Posted: Wed Sep 23, 2015 5:57 pm
by janosvitok
change your MIDI plugin channel to OMNI (1-16) in settings
Re: Problem with "APC40 MK2"
Posted: Wed Sep 23, 2015 6:53 pm
by bebellaseg
I just tried but when I change the single channel fader on the corresponding channel number works. example: Channel 1 + 1 = master fader only; Channel fader 2 = 2 only ext ...
Re: Problem with "APC40 MK2"
Posted: Wed Sep 23, 2015 6:59 pm
by bebellaseg
I had not seen that one could activate "1-16" !!!! it works ! I'm really happy thank you very much !! You are a pro !
Re: Problem with "APC40 MK2"
Posted: Thu Jan 28, 2016 9:49 pm
by romainl
Thanks a lot... I was looking for this option since 4h !
Maybe, it could be better if we can see the "1-16" channel option. If you don't know it exists, you can't fint it, it's realy impossible ! You have to click the down Arrow, you can't see all the options at the same time.
But thanks again !
Re: Problem with "APC40 MK2"
Posted: Fri Jan 29, 2016 7:44 am
by plugz
Or you can read the documentation related to what you're trying to achieve.
Re: Problem with "APC40 MK2"
Posted: Fri Jan 29, 2016 5:55 pm
by romainl
Of QLC or the controller ?
In both of them, it's realy not clear !
Re: Problem with "APC40 MK2"
Posted: Fri Jan 29, 2016 5:55 pm
by mcallegari
romainl wrote:Of QLC or the controller ?
In both of them, it's realy not clear !
Seriously ?
The APC40 MK2 is a MIDI device, so you should read the QLC+ MIDI plugin documentation:
http://www.qlcplus.org/docs/midiplugin.html
which says:
MIDI Channel: This is the channel where QLC+ will receive or send data through the MIDI system. MIDI channels can go from 1 to 16. The special "1-16" channel will tell QLC+ to receive or send data on any MIDI channel.