Hi Guys,
Iam new here and for the first time using QLC. I bought a Enttec open DMX USB so i could control DMX as wel as my Dimmerpack Zero88. I've been watching over 2 hour of tutorials everywhere and made the first step to control lights with QLC+. However i did everything what all the tutorials said and when iam ready to control my lights nothing happens.
I connected my Enttec in the output screen to universe 1. Its also says its working perfectly.
I made general fixtures of 28 channels.
I made a scene with the first 4 channels as they are my Front lights.
I activated them.
And at least i made a virtual console with a few buttons redirected them to the scene.
When i press play and activate those buttons nothing happen. Not even in the function tab with scene's when i program them.
Extra info: Using a MacbookPro version 10.10.5 Yosemite and i restarted my Macbook afther installing.
Problem sending output to Dimmerpack
-
mcallegari
- Posts: 4827
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Hi, please read the documentation too, cause this is a very well known problem discussed like a million times in this forum.
You need to disable the Apple FTDI native driver.
See here
http://www.qlcplus.org/docs/dmxusbplugin.html
Note for OSX users: If your adapter is detected but doesn't produce any output, most likely you'll find the solution in the Questions and Answers page.
You need to disable the Apple FTDI native driver.
See here
http://www.qlcplus.org/docs/dmxusbplugin.html
Note for OSX users: If your adapter is detected but doesn't produce any output, most likely you'll find the solution in the Questions and Answers page.