Q Light Controller+

Is there a way how to create a chase by a chase generator?
Example:
An Odd/Even chase with the dimmer.
1. Odd on and Even off
2. Odd off and Even on

Now I make it by a submaster.

Add Your dimmers to group. Than create some RGB matrices.

Thanks for the reaction! Problem solved!
Is there a way that it works also with the shutter or doesn't?
And how works it with a RGB device?(I want select the color and dimmer channel separate of each other)

hi!

Go into the fixture pane, chase generator and turn a chase on and save it to a new scene. Then turn up the shutter channel and create a new scene, then create a new blank cue and link the two scenes you just made to it.

Hi amblulance23,

I think you just need to create separate groups for each separate section you want to generate a pattern for.

Once you have a group made it should appear in the RGB matrix list of groups.

If you wish to make different patterns to the default ones you can. Use the image pattern set on animation in the RGB matrix editor, load in a picture with your custom pattern made on it. (see Qlc Manual - matrix editor image section on how to do this)

If a DMX channel has more than one function eg shutter does different modes or styles of opening between 0 - 255 you may find you can't get it to work with just the RGB matrix. You may need to use a scene as well to set a base DMX value.
If you can post the DMX Channel information for your light would help.

Regards

Alex