Page 1 of 1
No feedback with livid base 2
Posted: Fri Aug 07, 2015 7:53 pm
by kitouch
Hi,
I've connect my livid base 2 to qlc+. Midi in work correctly but there is no item that I can cross for feedback fonction. Is there a solution ? Thanks
QLC+ 4.9.1 with mac 10.10.4
Re: No feedback with livid base 2
Posted: Fri Aug 07, 2015 9:42 pm
by mcallegari
Can you show us your Input / Output panel ?
Are you sure this device can receive MIDI signals sent from a PC ? (I watched some Ableton Live videos and apparently the device only sends signals to the software)
Re: No feedback with livid base 2
Posted: Sat Aug 08, 2015 11:15 am
by kitouch
Thanks for your answer.
The midi infos seams to present midi in, that's why i think feedback seems to be possible
Re: No feedback with livid base 2
Posted: Sat Aug 08, 2015 12:12 pm
by mcallegari
Hey, I am not able to download tiff images. Can you please use PNGs ? [EDIT] I've done that for you.
Anyway, MIDI OUT is what you need to send feedbacks. MIDI IN is to receive data.
From your screenshot, I see that QLC+ doesn't detect any output port on the Base 2.
This might indicate that:
- the device must be configured to enable the input channel
- the OSX IAC driver doesn't detect the device MIDI IN. Might be something to enable there as well
Just supposing though...you should be the OSX expert here
Re: No feedback with livid base 2
Posted: Mon Aug 31, 2015 8:57 pm
by kitouch
Hi,
Qlc detect output today. The feed-back work...but i don't know why...
Thanks for your help and for this soft