Q Light Controller+

QLC+ crashes when I try to open the simple view on the attached project.
I supose, it depneds on the 72 Geneeric RGB Fixtures I added.

I need that fixtures to get a good 3D-View with '3D Simple View', when switching to 54 channel mode of the 4 Stairville Show Bar 18x3W RGB to control every of the 18 LEDs individual.

I am using Win 8.
Is this a general bug or any individual problem on my side?

Greetings Udo

Hello,

Crash reproduced here when going to the simple desk tab with your workspace opened.

Thanks for reporting, I'll look into it later.

Found the root cause of the crash.

Here's a fixed workspace file, explanations will come later.

Yes, it works.
Thanks.
Udo

Also, you won't have to create all those RGB fixtures if you add heads in your fixture definition.

Fixed in GIT: https://github.com/mcallegari/qlcplus/c ... ad8a02c383

Thanks

Hi,
I can't find information about head definition, could you help me, how this works?

I'm using this definition to get a 3D view with '3D Easy View', there the head definition from QLC isn't known.

Udo

Hello,


There is no "3D view" in QLC+, only a 2D Monitor (unless you post from the future, but I doubt that)


The head definitions are done in QLC+ Fixture Definition Editor, when editing the Mode of the fixture.

http://qlcplus.org/docs/fixturedefinitioneditor.html
http://qlcplus.org/docs/modeeditor.html
http://qlcplus.org/docs/headeditor.html

As an example, I've completed the 18-channels mode of your fixture.

Thanks for your help.
It looks good. But the animatiion wizzard doesn't handle the heads correct.

For 3D view I use the '3D Easy View' programm, it works fine.
http://www.nicolaudie.com/de/easyview.htm
There I defined a RGB fixture for each head and got a fine view of my stage.

In QLC I found no difference by defining 72 RGB fixtures or defining 4 show bars with 18 heads each, except the problem at the beginning of that threat and the animation wizzard.

Udo