Page 1 of 1
Velleman VM116 Support
Posted: Thu Apr 30, 2015 10:38 am
by zoran8000
Hi all,
I tried to make my Velleman VM116 device works with QLC+, but unfortunately I didn't manage to.
Is it supported on recent version of QLC+ ?
I put all DLL and EXE in all folders (as I found in forums) but no way...
I can't even manage to list "Velleman" in the Input/output window...
Thanks for your lights...
Re: Velleman VM116 Support
Posted: Thu Apr 30, 2015 2:46 pm
by mcallegari
Hi, most likely a duplicate of these (please search the forum first):
viewtopic.php?f=5&t=8389
viewtopic.php?f=5&t=7297&p=30885
viewtopic.php?f=7&t=1795&p=8870
Note that the DLL must have a precise name. If I remember, all letters in caps.
In any case, I'm not sure it will work. It's a quite old device and in the meantime a lot of things changed...especially on Windows
Re: Velleman VM116 Support
Posted: Tue May 12, 2015 1:38 pm
by zoran8000
All of that did not worked.
I searched the forum at first sight, but all I found were not functiionnal.
Il finally manage to have a workaround : using a VM with OLA.
- OLA setup in a VM with Ubuntu 11.04 through VirtualBox.
- Velleman connected with virtual usb port on tha VM
- QLC+ send to OLA via ArtNet ; then OLA send data to Velleman K8062.
I tried it without DMX devices connected to, I can only see the Red led blinking to notify that some DMX data is routed from Velleman K8062.
I'll try this week and give you back the results.