Page 1 of 1
BCF 2000 and controllers
Posted: Mon Jan 06, 2014 11:59 am
by Dylan
Hi everybody ! Sorry for my bad talking... I'm french.
I was wondering a thing : which controller is the better ? BCF 2000 or Enttec wing (program or playback) ? Can I have the both (BCF and Enttec wing) ?
Thanks for your answers
BCF 2000 and controllers
Posted: Mon Jan 06, 2014 2:24 pm
by Massimo Callegari
Hello Dylan, I would say it depends on your budget and your needs.
There are users using BCF2000 and ENTTEC wings so they're both supported by QLC+
BCF 2000 and controllers
Posted: Mon Jan 06, 2014 3:43 pm
by Dylan
Thank you for your answer ! Can we use the Enttec wing and the BCF in the same show ?
BCF 2000 and controllers
Posted: Mon Jan 06, 2014 3:44 pm
by Massimo Callegari
Yes, but as input of two different universes
BCF 2000 and controllers
Posted: Mon Jan 06, 2014 4:05 pm
by Dylan
Can we have a single output with more than one input ?
BCF 2000 and controllers
Posted: Mon Jan 06, 2014 4:48 pm
by Massimo Callegari
Dylan, at this point I think you need to explain what you want to do with QLC+, otherwise I can only imagine, thus giving you wrong suggestions.
With the BCF you can have multipage control, so you can multiply its faders and buttons to the number of pages you need (they can be 100 if you want !)
Otherwise if you need a lot of faders then you maybe want to have a look at this:
http://www.behringer.com/EN/Products/LC2412.aspx
BCF 2000 and controllers
Posted: Mon Jan 06, 2014 4:55 pm
by Dylan
Okay, I think I have all my answers with this. That's nice of you, thank you very much