Q Light Controller+

First of all, GREAT JOB!
Actually there is nothing wrong with qlc+ as is, but it will be more flexible, in a live situations, if some sliders can be added, under EFX values (width,height,x/y offset,..). To change them faster if needed.
And may be, a slider/knob to adjust the input audio gain in audio trigger factory.
In that case, a pre-set can be saved and used as is, in a wither range of situation where the single audio input is used for more things at the same time , let say, recording, triggering, and other things,...

You may try compiling https://github.com/janosvitok/qlcplus/tree/efx-faders - for description see https://github.com/mcallegari/qlcplus/issues/24

Work in progress - nothing is guaranteed

Thanks Jano. That shut do the job. Actually you made it even more complicated that I originally have in mind. Actually my suggestion was to put just some sliders under the values in the EFX. But have it in the VC, wood be a killer.

I tested the 4.5.0 from the git-master. This is great! The only thing that I'm missing is the X,Y-Offset under the right click. And may it will be a good idea to move it in an xy-pad. So the xy-Offset can be controlled from it.

Are you talking about VC Buttons and context menu attributes ?
If so, it should be easy now to add more.

I was waiting for Jano to give me a hand on this, as I haven't tested them yet on EFX. Do they work ?

Just added those 2 attributes. Can you please test them and let me know if they work ?
Thanks

It works. But not as expected. If I switch from VC to Function tab, it reset the values to full. Is there any possibility to have attribute control on XY-pad or at least on sliders?

No, it's not possible. The reason is simple. VC buttons are connected to functions (like an EFX) while XY pads are directly connected to fixtures.
Totally different things.

If you're asking me to improve the XY pad, that's another story...and the answer is yes, it is possible, but of course we're always talking about my spare time

I guess it's already Christmas...
Check out what I've done on VC XY pads !

Sure. I didn’t mean now. But just as an idea for the future....
Thanks!