OSC Control of Cue Lists does not work properly OS X Mountain Lion
Posted: Sun Jan 05, 2014 12:31 am
I am trying to control a Cue List in QLC+ using MIDI signals sent from QLab. Structure of the command is "/cue/adv/number 1" (without quotes). I have tried several variants with no change in result.
When an OSC signal is sent from QLab to QLC+, the very first time, the Cue List advances. All future attempts present no change on the QLC+ side. Just for kicks I tested the same OSC command on a button. It worked every time.
I have tested on multiple machines with the same result. I'm not sure if it's a bug in the software or if I'm doing something wrong.
Captured, the input channel appears as "27274:?"
When an OSC signal is sent from QLab to QLC+, the very first time, the Cue List advances. All future attempts present no change on the QLC+ side. Just for kicks I tested the same OSC command on a button. It worked every time.
I have tested on multiple machines with the same result. I'm not sure if it's a bug in the software or if I'm doing something wrong.
Captured, the input channel appears as "27274:?"