Hello
How does the toggle function on/off exactly work?
I've created two functions with buttons toggle function on/off:
- a function which sets two channels for the hazer blower speed and the output volume both to 50
- a function which sets one channel for the strobe function of my led pars tot 200
If I click the button it displays a green border showing that the function is active, dmx signals are sent but if I click again the green border disappears but there is no response to set the channels back to 0.
Do I really need to create a separate button to return these channels to 0?
Regards
Toggle off not working on some scenes
I've narrowed the problem down. It works if I:
- Reconfigure the fixtures and switch the effects-channel to intensity-channels in the Fixture definition editor
- Delete the affected fixtures in QLC+, add them again, program the scene
- Don't disable the 'can fade' checkbox
Sadly this means I have to start all over again!
- Reconfigure the fixtures and switch the effects-channel to intensity-channels in the Fixture definition editor
- Delete the affected fixtures in QLC+, add them again, program the scene
- Don't disable the 'can fade' checkbox
Sadly this means I have to start all over again!