Timer in chase loosing control

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
Jimmy T.

Hi,

QLC 4.7.4 (OSX 10.9.5)

I created several scenes and put them into a chase. I then started the chase and it was way too fast as the timer was at 0 for duration. I adjusted the duration and then the chase would run normal on the last 4 parts but just quickly through the 1st 2 parts.

All durations were set the same, adjust duration, fade-in or fade-out had no affect on them.

I saved my workspace, close QLC and re-opened my workspace and the chase worked correctly.

If there is anything I can capture for you in that instance please let me know.

Thanks
Jimmy
Top
david garyga

Hello,

You can start by uploading your workspace file here :)
Top
Post Reply

Return to “Archive - no new threads please”