Page 1 of 1
Enttec Dmx usb pro mk2 not recognized in qlc+ version 4.7.2
Posted: Thu May 29, 2014 5:24 am
by Domenic
Running Mac 15" pro with OSX 10.6.8 downloaded QLC+ version 4.7.2 and it does not recognize my Enttec Usb Pro MK2, it does not show up in the program up at all... Down loaded version 4.6.1 and it shows up and works...why is this?
Enttec Dmx usb pro mk2 not recognized in qlc+ version 4.7.2
Posted: Wed Jun 04, 2014 4:04 pm
by Norman Bates
I have had a similar problem, Enttec pro MKII does not show up at all in QLC+ 4.7.2 on 10.6.8.
However, QLC+ 4.7.2 does see the box and works when running under Mountain Lion.
I'm going to try the 4.6.1 version on my 10.6.8 install and see if I can replicate your positive results.
Enttec Dmx usb pro mk2 not recognized in qlc+ version 4.7.2
Posted: Wed Jun 04, 2014 4:27 pm
by Norman Bates
Confirmed.
QLC+ 4.6.1 running under OSX 10.6.8 finds the Enttec Pro MKII box and works.
QLC+ 4.7.2 does not. What changed?
Enttec Dmx usb pro mk2 not recognized in qlc+ version 4.7.2
Posted: Wed Jun 04, 2014 6:48 pm
by Massimo Callegari
In theory nothing...at least on the detection part.
Maybe the libftdi version changed.
You can try to copy the libftdi library from the 4.6.1 bundle into the 4.7.2 bundle.
Not guaranteed to work of course