Q Light Controller+

Hello,

I'm having issues getting my LED Dimmer fixtures (they are the 18x10W type LED ParCans available on ebay) to work with Sequences (my understanding - based on reviewing the manual - is a chaser embedded in a scene).

When I define a sequence in a scene of 4 of these PAR cans, and simply program a 4 step sequence of each light turning on one at a time in a succession, the sequence plays normally when I manually step through the steps. However when I assign hold / fade in-out times to it, the lights do not behave in the same manner. For instance one light is constantly on while QLC steps through the sequence. I do not see DMX values change on when using the DMX monitor. However manually stepping through the sequence yields correct values.

I also confirmed that creating a 4 scenes and then adding them to a chaser to mimic the desired effect of a sequence works without any issues. Lights respond as expected during play back.

My dimmers are configured to LTP (I think it's the best method considering I use them for strobe and dimming effects).

I tried this on QLC+ (Windows) 4.7.1 and 4.7.2.

Am I missing something, is this by design or a bug?

Thanks.

Hello. I have a show coming up this weekend and would like to have an understanding of this. Can anyone help?

Can you attach your workspace and fixture definition here? So that I can try to reproduce the problem and try to come up with a solution.

Hello Jano.

Thanks for taking sometime to look into this. I'm attaching all relevant files. Please reference "00-TEST-SCENE-SEQ". I'm able to play this through manually stepping through the steps without issue. However the minute I play it automatically -- e.g. press play on the seq., -- DMX values do not change..

Hello Jano.. Did you get a chance to re produce the problem using my files? As per my other post, I noticed that the LED PARs do not persist to LTP (not sure if this is bug) but you'll have to change the 10x18 fixtures to LTP before trying out sequences.

Thank you.

Not yet... I'm too busy with other things in life. Thanks for remimder!