Q Light Controller+

i have created a profile for the martin mac 2000 profile 16bit and 8bit modes i have also attached the gobos since they were not in q

Do you have the approval from Martin to use their gobo pictures ?

Pictures did not come from Martin I found pictures of the gobo wheels and then used fireworks to make pngs

If this is the manual:
http://www.martin.com/service/downloadf ... pdf&cat=65
then some adjustments may be made:
1. tilt range is 267 not 276
2. zoom range is 10 deg to 28 deg


On Fri, Jun 7, 2013 at 10:36 PM, lcslouis wrote:

> Pictures did not come from Martin I found pictures of the gobo wheels and
> then used fireworks to make pngs
> ------------------------------
>
> Martin Mac 2000 Profile
> ------------------------------
>
> Sent from sourceforge.net because you indicated interest in
> https://sourceforge.net/p/qlcplus/discussion/fixtures/
>
> To unsubscribe from further messages, please visit
> https://sourceforge.net/auth/subscriptions/
>