Martin Mac 2000 Profile
i have created a profile for the martin mac 2000 profile 16bit and 8bit modes i have also attached the gobos since they were not in q
- Attachments
-
- Martin-Mac-2000-Profile.qxf
- (18.63 KiB) Downloaded 137 times
-
- Martin.zip
- (406.64 KiB) Downloaded 128 times
Pictures did not come from Martin I found pictures of the gobo wheels and then used fireworks to make pngs
If this is the manual:
http://www.martin.com/service/downloadf ... pdf&cat=65
then some adjustments may be made:
1. tilt range is 267 not 276
2. zoom range is 10 deg to 28 deg
On Fri, Jun 7, 2013 at 10:36 PM, lcslouis wrote:
> Pictures did not come from Martin I found pictures of the gobo wheels and
> then used fireworks to make pngs
> ------------------------------
>
> Martin Mac 2000 Profile
> ------------------------------
>
> Sent from sourceforge.net because you indicated interest in
> https://sourceforge.net/p/qlcplus/discussion/fixtures/
>
> To unsubscribe from further messages, please visit
> https://sourceforge.net/auth/subscriptions/
>
http://www.martin.com/service/downloadf ... pdf&cat=65
then some adjustments may be made:
1. tilt range is 267 not 276
2. zoom range is 10 deg to 28 deg
On Fri, Jun 7, 2013 at 10:36 PM, lcslouis wrote:
> Pictures did not come from Martin I found pictures of the gobo wheels and
> then used fireworks to make pngs
> ------------------------------
>
> Martin Mac 2000 Profile
> ------------------------------
>
> Sent from sourceforge.net because you indicated interest in
> https://sourceforge.net/p/qlcplus/discussion/fixtures/
>
> To unsubscribe from further messages, please visit
> https://sourceforge.net/auth/subscriptions/
>