Q Light Controller+

Hey everyone!

I'm new to QLC+ and these are my first definitions. I watched the video on how to define them and tried to define them to the best of my abilities!

First I was wondering if they could be looked over to see if they are correct. Second, I was wondering how to define a channel when it has multiple parameters, for example: On the slim par 38 in 7 channel mode, channel 5 has multiple functions. When channel 6 is at 32-223, 0-225 is slow~fast, or when in RGB mode 16-225 is slow~fast. How should these be properly defined?

Please let me know if there are other corrections, and thank you SO SO much!!

Heyo! Would anyone be able to take a look at this? Is there more specific questions I should be asking?

Thanks!

It's just a matter of time before they gets reviewed.
Please be patient

I created a fixture for the slimpar 38 a few days ago if you want to see an example of how to do the multiple perimeter setup https://sourceforge.net/p/qlcplus/discu ... /948e8e9c/

Hi SilentStill.

First the Chauvet COLORRail (attached).

Everything's good apart from the 'click and go' colours were missing from channel 'Color Macro'. I've added them.

Regards,

Boxy

Some missing physical data. fixed.

And finally, there was missing physical info and I've modified some things a little bit. The datasheet doesn't match the fixture BTW.