Q Light Controller+

Posted: **Sun Mar 08, 2015 4:17 am**

Hi all...
I've created 3 fixture definitions for 3 different models of Cameo LED Pars (9x3, 18x3 and 18x8 Watts).
As this is my first time on this i'd like you to test them as I'm not sure that everything is OK. I'm not sure why but in 2DView I don't see colors from RGB Channels to change and master channel works like strobo... with red color... I can't find why this is happening, so please take a look and if someone has any idea(s) to share i'd be greatfull...

Posted: **Sun Mar 08, 2015 4:18 am**

and the definitions attached now...

Posted: **Thu Apr 02, 2015 11:25 am**

Hi,

Please add links to the manuals for reference

Thanks

Posted: **Thu Apr 02, 2015 11:32 am**

I suppose they are here:

http://www.adamhall.com/en/Cameo_PAR_56 ... using.html
http://www.adamhall.com/en/Cameo_PAR_64 ... using.html
http://www.adamhall.com/en/Cameo_PAR_64 ... using.html

I didn't check the manuals versus definitions though.

Posted: **Thu Apr 02, 2015 11:40 am**

Thanks, checking...

Posted: **Thu Apr 02, 2015 12:04 pm**

Good, added, thanks