Cameo LED Pars

Here you can share your fixture definitions with the community
Forum rules
Post Reply
vag

Hi all...
I've created 3 fixture definitions for 3 different models of Cameo LED Pars (9x3, 18x3 and 18x8 Watts).
As this is my first time on this i'd like you to test them as I'm not sure that everything is OK. I'm not sure why but in 2DView I don't see colors from RGB Channels to change and master channel works like strobo... with red color... I can't find why this is happening, so please take a look and if someone has any idea(s) to share i'd be greatfull...
Top
vag

and the definitions attached now...
Attachments
Cameo-LED-RGBW-PAR64-18x8W.qxf
(3.88 KiB) Downloaded 48 times
Cameo-LED-RGB-PAR64-18x3W.qxf
(1.94 KiB) Downloaded 53 times
Cameo-LED-RGB-PAR56-9x3W.qxf
(1.94 KiB) Downloaded 59 times
Top
david garyga

Hi,

Please add links to the manuals for reference

Thanks :)
Top
Jano Svitok

I suppose they are here:

http://www.adamhall.com/en/Cameo_PAR_56 ... using.html
http://www.adamhall.com/en/Cameo_PAR_64 ... using.html
http://www.adamhall.com/en/Cameo_PAR_64 ... using.html

I didn't check the manuals versus definitions though.
Top
david garyga

Thanks, checking...
Top
david garyga

Good, added, thanks :)
Top
Post Reply

Return to “Fixture definitions”