Page 1 of 1
SGM Victory II 250 - Updated
Posted: Wed Jan 21, 2015 9:55 am
by Marco Palmisano
Hi, I've updated the fixture with 2nd mode.
bye
SGM Victory II 250 - Updated
Posted: Wed Jan 21, 2015 11:01 am
by Boxy
Hi Marco,
Some comments on this definition:
1. Channels names/functions. Please make these reflect the names as they appear exactly in the manual (attached). For example channel 9 is '50-79 Prism on - not rotating'. The channel itself is called 'Prism and prism rotation'.
2. Channel 2: Colour. Please add the two colours to the capability section of each colour. They are currently blank.
3. Gobos: They are currently blank but exist as follows under QLC+/Gobos/SGM with goboxxxxx.png as follows:
1: 00125
2: 00032
3. 00059
4. 00127
5. 00004
6. 00064
7. 00027
4. There is no physical information.
Thanks
SGM Victory II 250 - Updated
Posted: Mon Feb 02, 2015 9:05 pm
by Jano Svitok
Marco, I've committed the update, since it's an improvement over what's already included. It would be great if you could find some time to include the missing information. Thanks!
Re: SGM Victory II 250 - Updated
Posted: Thu Apr 21, 2016 7:44 am
by Sbs
Hi, I have a problem, I have 4 victory II 250, my console eurolite sees them and they work, while qlc doesn't work, someone can tell me anything, it's urgent ... thanks
Re: SGM Victory II 250 - Updated
Posted: Thu Apr 21, 2016 8:54 am
by plugz
Hello,
1. Create a post in the "issues" part of the forum, here is for fixture definitions.
2.
Sbs wrote:qlc doesn't work
Last time I checked, it was working.