Small Note
Posted: Thu Dec 18, 2014 8:27 am
Hello everyone,
First of all thank you for the work you do, which is fantastic.
(Massimo) Sorry for not succeed in making FIXTURES without mistakes, and thank you for correcting me.
Here I have a question:
I noticed a problem with publishing an event bar fixture
Event bar 4 x 15w White Mode 9 channels ok each projector are the same movement. And with the Mode 28 channels the FX function uses the first Pan & Titl in the channels.
I solved the problem : I create a 7-channels mode and I use 4 X event bar fixture.
But if one day a projector using more motion, it will pose a problem to use the FX function.
I hope you understand the problem posed.
For example this one:
https://www2.highend.com/products/LED/s ... _C1_DS.pdf
First of all thank you for the work you do, which is fantastic.
(Massimo) Sorry for not succeed in making FIXTURES without mistakes, and thank you for correcting me.
Here I have a question:
I noticed a problem with publishing an event bar fixture
Event bar 4 x 15w White Mode 9 channels ok each projector are the same movement. And with the Mode 28 channels the FX function uses the first Pan & Titl in the channels.
I solved the problem : I create a 7-channels mode and I use 4 X event bar fixture.
But if one day a projector using more motion, it will pose a problem to use the FX function.
I hope you understand the problem posed.
For example this one:
https://www2.highend.com/products/LED/s ... _C1_DS.pdf