We have a combination of the 2 effect lighting installed in our club, most if not all of the fixtures are set on the same DMX address, as the DMX control is from the pulsar masterpiece relay unit which has been preprogrammed then one output goes to a DMX splitter box then all fixtures are fed of that.
It would be good to get both fixture profiles, if someone could help out, thanks.
LFX Scan 250 Manual - http://www.soundlightuk.com/shop/lfx/Ma ... %20250.pdf
EVL Proscan 250 Manual - http://www.chinnicktheatreservices.com/ ... Manual.pdf
LFX Scan 250 / EVL Proscan 250
-
Boxy
EVL 'Proscan'. Nothing Pro about the manual...
Dimensions: No information
Weight: 10.5/12/12.5/14kg????
Gobo colours: Diagram doesn't match the tables
Active music control: Channel values overlap in ver3.2 mode
I've left the lousy grammer and capitalisation in to be authentic to the documentation.
Dimensions: No information
Weight: 10.5/12/12.5/14kg????
Gobo colours: Diagram doesn't match the tables
Active music control: Channel values overlap in ver3.2 mode
I've left the lousy grammer and capitalisation in to be authentic to the documentation.
- Attachments
-
EVL-Pro-Scanner-150_250.qxf- (3.88 KiB) Downloaded 48 times
-
Boxy
And the other one, which seems to be a version of the first with different software in it.
I'm not expecting these to be added to the default fixtures as is (or even at all, they're basically unbranded [Chinese?] imports). How many of these are about in Europe?
I'm not expecting these to be added to the default fixtures as is (or even at all, they're basically unbranded [Chinese?] imports). How many of these are about in Europe?
- Attachments
-
- LFX-group-Scan-250.qxf
- (5.75 KiB) Downloaded 50 times
-
Dean Clough
Thanks Boxy i'll have a look at them very soon.
We have about 40 of these installed between the 3 parts of the bars, so it looks like we may of got the last of the discontinued versions.
I have seen them in other bars, but some with the barrels on them, so they must of been popular in the UK at some point or is that just wishful thinking.
We have about 40 of these installed between the 3 parts of the bars, so it looks like we may of got the last of the discontinued versions.
I have seen them in other bars, but some with the barrels on them, so they must of been popular in the UK at some point or is that just wishful thinking.