Q Light Controller+

Last weekend I had 8 RGB led strips with 12 led's per strip.
Those strips were placed vertically.
The first column had dmx address 1 to 36.
The second column had dmx address 37 to 72.
etc.

I tried to create an RGB fixture group for this setup with the 'Add RGB Panel' screen.
However I only could create a correct setup for when the fixtures are placed horizontally.
It creates fixtures with 8 heads instead of 12.
Did I miss something, or is this not possible at the moment?

Sorry for posting in the wrong forum. I don't know how to move the post.

Thanks,
Joep

Create a Prototype RGB Matrix with the dimension you want to have but e.g. only one PAR. In the Matrix editor you can delete every fixture and then you can add all fixtures you want also in vertical allignement.