Q Light Controller+

Attached are two fixtures, one for the 4Bar by Chauvet (similar to 4Bar Tri) and Intimidator Spot Duo.

Attached here as well.

Hello Shikhir. Thanks for these but please do not use filesharing links.
I had to approve your post cause it went into an automatic moderation area.

I am reviewing the files. Lot of things missing. Hold on.

Here's one for example.
The other takes more time cause there is no click&go defined

Will take a look. I defined it per the Chauvet manual and it's working on my end, what was missing?

And here's the Initimidator.
On both fixtures there were missing modes and physical info.
Also the file names were wrong.

Maybe better next time

Anyway I've fixed and added them, thanks

Ah I see, the click and go. Not an issue, will see if the gobo's are included with your default files and the colors on the Spot Duo are pretty easy (only a few) - was that all?

EDIT: Okay, cool. Also you can technically run these lights in less channel modes which is why I put 15CH for the 4Bar and 20 for the Duo. Those are the max channel setups for customization that I use, but I suppose someone would use the basic 3 channel mode for the 4 bar or 17 channel mode for the Spot Duo, not sure (they're defined in the Chauvet manual). Anyways, max includes all Thanks for fixing!

Yeah, technically they worked, but they weren't at the standard of most of the QLC+ fixtures.
Nothing major, just cosmetics that sometimes can make the life easier during a live show.

I had to add a few gobos to QLC+, so you'll see them in version 4.8.1.
Otherwise download them manually from here and place them in the Chauvet gobos directory:
https://github.com/mcallegari/qlcplus/c ... 2271d1a72e

Those modes are defined in the manuals:
http://www.chauvetlighting.com/products ... ev5_WO.pdf
http://www.chauvetlighting.com/products ... -logo-.pdf

Yeah I know, since these are subsets of the max channel version it doesn't matter technically. Also I assume for moving objects (pan, tilt) it's automatically assigned the LTP setting when loading the fixture?